4.0mm Cannulated Cancellous Screws, Full Thread, Self Tapping

4.0mm Cannulated Cancellous Screws, Full Thread
September 3, 2016
4.0mm Cannulated Cancellous Screws, Short Thread
September 3, 2016
Show all

4.0mm Cannulated Cancellous Screws, Full Thread, Self Tapping


Categories: , ,

Please fill below form to access PDF

Specifications

Specifications

  • Cannulated shaft accepts guide wires of 1.2mm =
  • Hemispherical head of the screws ensures optimal annular contact with washers and plates when screws are angled
  • Low-profile head reduces possibility of soft tissue irritation
  • Standard 2.5mm hexagonal drive is compatible
  • Reverse cutting flutes assist in screw
  • Choice of thread lengths offers best fit of threads into far bone fragment, for greater interfragmentary compression
  • Cancellous thread profile uses deep ‘cutting threads’ with a large pitch to increase resistance to pullout. The large pitch also accelerates screw insertion and removal.
  • Fully threaded screws are intended to stabilize fractures where little to no compression across the fracture site is needed.
  • Self-tapping screw tip facilitates screw insertion by eliminating the need for tapping.
  • Length ranges from 10mm-60mm with a diameter of 4.0mm.
  • Available in both Titanium and Stainless Steel
Indications for use

Indications for use

Fixation of fractures with medium fragments, eg.-

  • Tarsals and metatarsals fractures, fixation in metatarsals and phalangeal osteotomies
  • Tarsometatarsal and metatarsophalangeal arthrodeses
  • Ligament fixations
  • Hallux valgus corrections
High Risk Solutions